|
"CUSTOMER
SATISFACTION IS THE CORNER STONE OF VENUS WORLDWIDE'S MISSION. VENUS EMPLOYS
MODERN PRODUCTION, MANAGEMENT AND QUALITY STANDARDS TO ACHIEVE THIS
OBJECTIVE!"
|
|
At Venus Worldwide Trained and highly experienced
operators, calibrated dyes and latest machinery enable us to produce instruments
within required precision limit, which is further assured by Quality Assurance
Inspection to ensure the quality according to the international quality
standards.
|
|
|
This critical process is
carried out on red-hot steel cuttings (at 800 to IOOOC), which are hammered
by a Hot Forging Hammer (50-300tons). Process is executed by Highly skilled
personnel under strict process control conditions. After Trimming,
Straightening and Quality Assurance Inspection, the instruments are sent to
"Milling and Filing departments" for further run |
|
|
At
VENUS WORLDWIDE transformation of Skills and Experiences of the forefathers
regarding Filing and Shaping of the instruments transcend us to produce The
Piece of Art". After being filed, the well refined "milling" becomes the ultimate
process to beautify the instruments "of course with the involvement of
latest machinery and expertised manpower". After completion of filing process, instruments are heat treated to get the required level of hardness ..
|
|
| Different kind of Belts
and Grinding Wheels are used to get the desired results of Product's Outlook.
Scissors and all other Cutting Instruments also undergo the Edge Grinding
Process. Samples, work instructions and workmanship criteria are the vital tools
to incorporate the truth worthy customers' entire requirements in this process.
|
|
|
SETTING AND QUALITY CONTROL INSPECTION |
|
Each and every instrument
is checked in its smooth movement, functional and polishing requirement by the
Quality Controllers. Our experience of past training, quality planning and
strict quality control gives us the required level of Valued Customer's
Satisfaction. After Quality Control Inspection the instruments are then rebuffed
for ultra better results.
|
| Imported (high tech)
machinery, trained operators and process of validation are used in the
instrument cleaning process to get the required results of cleanliness. |
|
|
Product friendly
environmental conditions in the packing area, calibrated tools, testing
instructions, highly experienced and trained quality assurance inspectors
carryout this process for final inspection in order to ensure the entire
conformance to Customers' satisfaction. Each and every instrument is then judged
by these inspectors with an eye of Internal Customer. Packaging is always done
as per instructions of Valued Customer's. |
| After packaging, each
carton is labeled with customer's identification alongwith the details of packed
contents and is sent to dispatch room with shipping document for each shipment
that is ready for dispatch.
|
|
|
